GATES HI-POWER®
WRAPPED, CLASSICAL SECTION V-BELT
The wrapped classical section Hi-Power V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent “dishing” and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
CONSTRUCTION
- Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear.
- The Flex Weave oil and heat resistant cover protects the belt core from the toughest environments.
- The vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads.
- High-quality rubber compound protects the belt against heat, ozone and sunlight.
- The belt will not catch fire from heat buildup, even with severe slippage.
- Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX.
BENEFITS
- Excellent performance/cost ratio.
- Reliability and efficiency.
- Long belt life reducing replacement and maintenance costs.
- Match system: all sizes meet Gates UNISET tolerances, they can be installed without matching.
- REACH and RoHS 2 compliant.
- Temperature range: -30°C to +60°C.
| Ordering Code | |||
|---|---|---|---|
| Z19 Z - Section 19 - Inside length (inch) | |||
| NOTE: For correct design and tensioning of the belt please use Gates DesignFlex® Pro™ Drive design software, available on www.Gates.com/Europe. | |||
| Identification Durable red marking indicating the belt type and white marking indicating the belt dimensions | |||
| Sections and nominal dimensions | |||
|---|---|---|---|
| Section | Width (mm) | Height (mm) | Length range (datum length - mm) |
| Z | 10 | 6 | 425 - 2500 |
| A | 13 | 8 | 457 - 5000 |
| B | 17 | 11 | 650 - 11960 |
| c | 22 | 14 | 1080 - 10795 |
| D | 32 | 19 | 2500 -16850 |
| E | 38 | 25 | 4650 - 15330 |
