GATES QUAD-POWER® 4 POWERBAND®
HEAVY DUTY RAW EDGE, MOULDED NOTCH, NARROW SECTION, MULTIPLE V-BELT
Gates PowerBand® belts are engineered for drives that are subject to pulsating loads, shock loads or extreme vibrations. By joining several Quad-Power® 4 V-belts together the Quad-Power® 4 PowerBand® offers a maintenance-free solution for drives where single belts vibrate, turn over or jump off the pulleys. It comes with all of the advantages of the single belt: this SERVICE FREE EPDM belts are designed to extend product life time eliminating costly downtime for re-tensioning, repair and replacement. Furthermore these belts offer a broad temperature operating range.
CONSTRUCTION
- Minimal-elongation polyester tensile cords allow for stable tension over the entire lifetime.
- PowerBand® construction is built as one solid unit, controlling the belt-to-belt distance and preventing sideways bending. This provides excellent resistance against vibrations and shock loads.
- Flat back construction reduces noise when used with a back side idler or tensioner
BENEFITS
- Service-free PowerBand® V-belt with high stability on the toughest drives.
- Halogen-free belt.
- Perfect fit on standard ISO/DIN (for XPZ/XPA/XPB) or RMA (for 3VX/5VX) V-pulleys.
- Manufactured to DIN7753, ISO4184, RMA IP-22.
- Savings in drive space and weight thanks to high transmission efficiency.
- High stability and smooth running on the toughest drives.
- Important design economies possible.
- Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX.
- RoHS 2 and REACH compliant.
- Match system: all sizes meet Gates UNISET tolerances, they can be installed without matching.
- Temperature range: -50° to +130°C.
| Ordering Code | |||
|---|---|---|---|
| XPB2500/2 XPB - Section 2500 - Datum length (mm) 2 - Number of ribs | |||
| NOTE: For correct design and tensioning of the belt please use Gates DesignFlex® ProTM Drive design software, available on www.Gates.com/Europe. | |||
| Identification Durable blue marking indicating the belt type and white marking indicating the belt dimensions | |||
| Sections and nominal dimensions | ||||||||
|---|---|---|---|---|---|---|---|---|
| Section | Standard numbers of ribs | Rib spacing/ Pitch (mm) |
Width (mm) |
Height (mm) |
Length range (datum length - mm) |
|||
| 2 | 3 | 4 | 5 | |||||
| XPZ | X | X | X | 12.0 | 10 | 8 | 800 - 3550 | |
| XPA | X | X | 15.0 | 13 | 10 | 800 - 4000 | ||
| XPB | X | X | 19.0 | 16 | 13 | 1250 - 4750 | ||
| 3VX* | X | X | X | X | 10.3 | 10 | 8 | 635 - 3555 effective length - mm |
| 5VX* | X | X | X | X | 17.5 | 13 | 10 | 1270 - 5080 effective length - mm |
